GENERAL INFO
|
||
|---|---|---|
| Follow Me Router - 1 or 2 SIM's (GSM version only) The follow me router offers all the capabilities of the Single ChannelFCT with the addition of a ‘Call Back’ feature - the subscriber can place calls through the router via any phone. How does it work? The subscriber need only call the router - upon hearing a ringing tone, the subscriber simply hangs up and awaits the “call back”. On receiving this call, usually within a few seconds, the customer answers the phone and receives a dial tone; the customer may then dial a requested number of his/her choosing. This saves the cost of the call. A smart gateway that enables call routing through LCR - Least Cost Routing method Perfect for people out of the office. (IE taxi drivers, Sales teams) The follow me router feature allows the subscriber never to miss a call, even if not in the office. All calls can be forwarded through to a predefined phone so you never miss a call: Including voice, data & sms |
||
SPECS
|
Data Interface
|
|
GSM Parameters |
| DATA RS232 (GPRS or CDS) |
GSM channels 1 Channel |
|
| Connector RJ-45 (female) |
Network types 850 / 900 / 1800 / 1900 MHz quad-band or dual band (Depending on GSM engine) |
|
| Transmission Rate 9600-115200 bit/sec, autobauding |
GSM engine Wavecom ( P5186 ) |
|
| Transmitter power +33 dBm ( 2W ) 850 / 900 MHz or +30 dBm ( 1W ) 1800 / 1900 MHz |
||
| SIM card 1 SIMs per channel, Small Plug in, 3V |
||
| Antenna connector SMA ( female ) Impedance 50Ω |
||
|
|
||
Interfaces |
Administration |
|
| FXS Caller ID display |
User Management program via COM Includes version update capabilities for firmware or management Software Programming: DTMF |
|
| FXO Caller ID |
CLIP / CLIR |
|
| LAN RJ-45RJ-45 |
Gain Control | |
|
|
||
Main Power
|
Other |
|
| Power Supply 12V DC |
Dimensions 90 x 110 x 30 mm |
|
| Power Input Max - 0.5 AMP |
Weight 285 g ( net ) |
|
| Operating Temperature -5 to +60 °C |
||
| Relative Humidity Max 95% at +40 °C |
||
